NetApp

Netapp X66020A-R6 1M MiniSAS HD to QSFP Cable

56152-02 NetApp 16 Slot Disk Array 2x PSU 5x 300GB 8x 500GB Seagate Hard Drives

NAJ-1001 NetApp DS2246 24-Drive Storage Array 2x IOM6 Controllers 2x Power Supply No HD

114-00063 Netapp 850W Power Supply for FAS3140, FAS3160, FAS3170 Systems

NetApp NetApp X3219A FAS2700 FAS2750 A200 Series Controller

NETAPP 111-04373+D0 SAS Disk Array Controller Module

The NetApp X357A (also listed as NetApp 3.8TB SAS 12G SFF SSD in many reseller and documentation references) is an enterprise-class 3.8TB SAS solid-state drive (SSD) in 2.5-inch Small Form Factor (SFF, 15mm z-height) with a 12 Gbps SAS (SAS-3) interface.

This is a high-capacity, read-intensive / mixed-use SAS SSD from NetApp's validated drive portfolio, typically an OEM-branded version of the Seagate Nytro 3332 or 3331 series (common OEM model ST3840FM0078 or similar), optimized for high IOPS, low latency, and reliable 24×7 operation in demanding storage workloads.

It is designed for use as a performance tier, cache drive, metadata acceleration, or general-purpose SSD in NetApp FAS/AFF hybrid and all-flash arrays, providing significantly faster random read/write performance than 10K/15K HDDs while offering much larger capacity than earlier 1.6TB–1.92TB SAS SSDs.

Key features include:

• Dual-port SAS for redundancy and multipathing in high-availability configurations
• Power-loss protection (PLP) via onboard capacitors to flush in-flight writes during power loss
• Advanced ECC and end-to-end data protection for enterprise-grade integrity
• Large DRAM cache for excellent burst performance
• 512e (512-byte emulation / Advanced Format) sector format for broad compatibility

In NetApp deployments, the X357A is commonly used in FAS/AFF hybrid nodes (e.g., FAS8300, FAS8700, FAS9000 series) and all-flash AFF systems (e.g., AFF A-series) — particularly in 24-drive or 48-drive 2.5" shelves (DS224C, NS224) — for high-performance tiers, caching, or replacing smaller SSDs in existing arrays

The NetApp X342A-R6 (also cross-referenced with OEM Seagate part ST1200MM0129) is an enterprise-class 1.2TB SAS hard disk drive (HDD) in 2.5-inch SFF (Small Form Factor) with a 12 Gbps SAS (SAS-3) interface and 10,000 RPM spindle speed.

This is a high-performance, tier-1 enterprise SAS HDD from Seagate’s Enterprise Performance 10K HDD family (specifically the ST1200MM0129 model from the v7/v8 series), rebranded and fully certified by NetApp for use in FAS/AFF storage systems, E-Series, and other NetApp platforms.

It is optimized for low-latency random I/O, high IOPS, and reliable 24×7 operation in demanding workloads such as databases, virtualization, VDI, OLTP, transactional systems, boot/OS volumes, and primary/performance storage tiers where speed and responsiveness matter more than maximum capacity per drive.

The drive features:

• Dual-port SAS for redundancy and multipathing in high-availability configurations
• 256 MB cache buffer for improved burst and sustained performance
• Advanced rotational vibration safeguards to maintain stability in dense multi-drive shelves
• 512e (512-byte emulation / Advanced Format) sector format for broad OS/RAID compatibility

In NetApp deployments, the X342A-R6 is commonly used as a performance tier drive in FAS/AFF hybrid arrays, E-Series storage, or as a replacement/spare in 2.5" disk shelves (DS224C, DS2246, etc.) — especially in configurations needing high random IOPS alongside higher-capacity NL-SAS drives.

X448A-R6 Netapp 200GB Solid State Drive 100-00253

Netapp PL2-25068-30B 5350 0863 SAS 2.5" 12x SFF Storage Array Backplane 2nd :: Alt (P41005-05-A) Other //

Logicube OmniClone 5U Hard Drive Duplicator 1 Master to 5 Targets F-OMNICLONE5U

30744-01 Netapp Storage Array Adjustable 23.5"-32.5" Rail Kit