Storage

Hitachi DKS5H-J1R8SS Seagate 1GR201-046 ST1800MM0018 1.8TB 2.5" 12Gbps?SAS?Drive 2nd :: Alt (ST1800MM0018) Other //

46W0970 IBM New Hard Disks 900GB 10K 2.5 inch HDD for EXP2524 46W0970 inc. tray

708914-001 HP 8GB G3 Ultrium 3280 Tape Drive LTO5

The NetApp 114-00063 (also listed as 114-00063+A0 or X758-R6 in some references) is an 850W (891W peak) AC power supply unit (PSU) designed for the NetApp FAS3000 series controllers, specifically the FAS3140, FAS3160, and FAS3170 systems (and compatible with some FAS3240 configurations).

This is a rear-mounted, hot-swappable redundant power supply that provides 850W continuous output power (up to 891W peak) to the FAS3140/3160/3170 controller enclosure. It is engineered for high-availability storage systems running ONTAP, supporting dual-controller HA pairs with N+1 redundancy.

The PSU accepts universal AC input (100–240V) and delivers multiple regulated DC rails to the midplane for controllers, drives, fans, and I/O modules. It features an integrated cooling fan with front-to-back airflow (matching the FAS3000 chassis direction) and clear LED status indicators (AC OK, DC OK, Fault).

In typical deployments, the FAS3140/3160/3170 uses two PSUs in a redundant configuration — allowing live replacement of a failed unit without downtime.

EMC 303-364-000A-03 10GB DP SFP+ ADAPTER FOR ISILON H400

The Cisco PWR-C5-1KWAC (OEM model DPS-1000AB-5 A by Delta Electronics) is a 1000 Watt hot-swappable AC power supply designed for the Cisco Catalyst 9200 and 9300 Series switches. It provides high-efficiency power conversion and redundancy support in enterprise campus and data center environments.

This is a 1kW AC power module that delivers reliable, efficient power to Catalyst 9300 and 9200 stackable switches. It supports full PoE/PoE+ / UPOE budgets when used in pairs and features high efficiency (80 PLUS Platinum rated) with active PFC. The PWR-C5-1KWAC is hot-pluggable, allowing replacement without shutting down the switch when installed in redundant configurations.

The Cisco ISR4331/K9 is a 1U rack-mountable, modular Integrated Services Router from the Cisco ISR 4000 Series (launched 2013–2014). It is a mid-range branch router designed for medium-sized businesses, branch offices, and distributed enterprise WAN edge deployments requiring advanced routing, security, SD-WAN, voice, and application optimization in a compact, high-performance platform.

The ISR4331/K9 is a 3-port Gigabit Ethernet router with modular expansion capabilities. It combines routing, security, voice, and application services into a single 1U chassis. Key features include:

• 3 onboard Gigabit Ethernet RJ-45 ports (GigabitEthernet0/0/0, 0/0/1, 0/0/2) — configurable as LAN or WAN interfaces
• 2 NIM slots (Network Interface Modules) for expansion (e.g., T1/E1, serial, ISDN, LTE, voice, additional Ethernet)
• 1 SM-X slot (Service Module slot) for higher-density modules (e.g., SM-X-72FXS/DID voice module, SM-X-64FXO, UCS-E server blades)
• 1 ISM slot (Internal Service Module) for optional security/acceleration cards (e.g., ISM-VPN)
• Dual redundant power supply bays (default single PSU; optional second for redundancy)
• Redundant hot-swap fans (front-to-back airflow)

It runs Cisco IOS XE with modular software licensing:

• IP Base (default) — basic routing, security, QoS
• Upgradable to Security, UC (Unified Communications), AppX (Application Experience), or full UC license bundles

Common deployment scenarios:

• Branch office WAN router with MPLS/Internet breakout
• DMVPN hub/spoke or GETVPN
• Voice gateway (SRST, CME, CUBE)
• SD-WAN edge (with Viptela vManage/IWAN)
• Application visibility & control (AVC, NBAR2)

The "K9" in the part number indicates the crypto-enabled version (IPsec VPN support).

G3399 Dell PowerEdge Romb Lithium Ion Batther 3.7v G3399