Servers

The Cisco 03-25641-0600 (also known as UCSB-MRAID12G, UCS VIC 1340 + RAID controller bundle, or FlexStorage 12Gbps SAS RAID Storage Controller) is a modular RAID storage controller designed specifically for Cisco UCS B-Series Blade Servers (particularly B200 M3/M4/M5 generations) and some C-Series rack servers with modular LOM (LAN on Motherboard) and storage options.

This is not a standalone PCIe card but a mezzanine-style FlexStorage module that combines:

• Cisco VIC 1340 (Virtual Interface Card) – dual-port 10GbE + storage connectivity
• LSI SAS 3008/3108-based RAID controller – 12 Gbps SAS-3 with hardware RAID support

It installs into the dedicated mezzanine slot on UCS B200 blade servers (or equivalent C-Series modular slot), providing:

• Dual-port 10GbE networking (via VIC 1340) for high-bandwidth fabric interconnect
• 12 Gbps SAS RAID with up to 8 internal SAS/SATA drive ports (supports RAID 0/1/5/6/10/50/60)
• Integrated supercapacitor cache (no battery) for write-back caching during power loss
• Full Cisco UCS integration with UCS Manager (service profiles, firmware updates, monitoring)

The controller supports MegaRAID firmware from Broadcom/LSI, with Dell EMC UCS branding and validation for seamless UCS blade operation. It was a very common configuration in UCS B200 M4/M5 blades for servers needing both high-speed networking and hardware RAID for internal drives without using a full PCIe slot.

IBM Medium Changer Card Pack (MCP) TS3500 Tape Library - 45E0071
2nd :: Alt () Other //

0952848-01 Dell Xyratex Compellant 12-Bay HB-1235 SAS Storage Disk Array

The CX354A features two QSFP ports, each capable of operating in either 40 Gb/s Ethernet mode or 56 Gb/s FDR InfiniBand mode (40 Gb/s effective data rate with IB overhead). The VPI (Virtual Protocol Interconnect) technology allows each port to be independently configured for Ethernet or InfiniBand, providing maximum flexibility in hybrid or multi-protocol environments.
In EMC/Isilon deployments, this card was one of the most commonly used cluster interconnect NICs in Isilon H-series (hybrid) and F-series (all-flash) nodes, enabling ultra-fast node-to-node communication across the scale-out NAS cluster. It supports RDMA (Remote Direct Memory Access) over both native InfiniBand and RoCE (RDMA over Converged Ethernet), delivering near-zero CPU overhead and sub-microsecond latencies for data transfers.
The card includes extensive hardware offloads for TCP/UDP/IP stateless processing, large send offload (LSO), receive side scaling (RSS), iSCSI/SMB Direct acceleration, FCoE (Fibre Channel over Ethernet), and advanced virtualization features like SR-IOV (up to 127 virtual functions per port).

The NetApp FAS2240 (and the closely related FAS2220) is a compact, entry-level/mid-range unified storage controller from NetApp’s FAS2000 series, released around 2011–2012. It is a 2U rack-mountable dual-controller system designed for small to medium businesses, remote offices, and departmental deployments.

The FAS2240 / FAS2220 is a unified storage platform that supports both block (iSCSI, FC, FCoE) and file (NFS, CIFS/SMB) protocols in a single system. It comes with dual active/active controllers for high availability and uses ONTAP operating system.

Key hardware characteristics of the FAS2240:

• 2U chassis with 24 × 2.5" SFF or 12 × 3.5" LFF drive bays (model dependent)
• Dual controllers (active/active HA pair)
• Onboard ports: 4 × 1 GbE + 2 × 10 GbE (or 8 Gb FC depending on configuration)
• Expansion: Supports external disk shelves (DS2246, DS4243, etc.)
• Performance: Suitable for light to moderate workloads — virtualization, file sharing, backup targets, small databases, VDI, etc.

The FAS2220 is the lower-end variant with slightly reduced performance and port options compared to the FAS2240, but they share the same chassis and many components.

NetApp NetApp X3219A FAS2700 FAS2750 A200 Series Controller

The IBM 11S45D346 is the Evaporator Assembly (refrigerated / liquid-cooled heatsink) for high-end IBM zEnterprise systems, primarily the zEnterprise 196 (z196) and zEnterprise 114 (z114).

Product Description

This is a specialized water/liquid-cooled cold plate and evaporator unit that mounts directly onto the high-power Multi-Chip Modules (MCMs) in the Central Electronics Complex (CEC). It uses chilled liquid (facility chilled water or a dedicated cooling loop) to efficiently remove heat from the processors, providing far superior thermal performance compared to traditional air-cooled heatsinks.

In liquid-cooled zEnterprise configurations, multiple evaporator assemblies are used (one per processor book/MCM). The assembly includes:

• Integrated cold plate/evaporator with internal liquid channels
• Quick-connect fittings for the chilled water loop
• Temperature sensors and leak detection circuitry
• Precision mounting hardware and thermal interface material

This component is critical for maintaining proper operating temperatures in dense, high-TDP z196/z114 systems. Failure or leakage can trigger thermal alerts, processor de-configuration, throttling, or protective system shutdown.

Replacement is a major service action that typically requires powering down the CEC and trained IBM service personnel due to the liquid cooling loop.

12-00136-100-A JNI FibreStar Dual Port Fibre Channel HBA

12R7021 IBM Bulk Power Regulator for P590 P595

Cisco Catalyst 4500 Series 4200W PSU

The Cisco 341-0502-01, manufactured by LiteOn, is a dual-output external AC/DC power adapter that provides 53.5V at 1.55A and 12V at 3.5A through a 4-pin connector. It is commonly used to power specific Cisco routers, wireless controllers, access points, and certain service modules that require this unique voltage combination.

This compact yet powerful brick-style adapter converts standard 100-240V AC input into two regulated DC outputs (53.5V for PoE or main power and 12V for auxiliary electronics). It is an official Cisco spare part, often referenced under the alternate part number 341-100399-01. The adapter is widely used with Cisco ISR series routers, Aironet wireless controllers, and some Catalyst or ASR components that do not use standard internal PSUs.

The Cisco 341-0435-01, also designated as A9K-750W-DC, is a 750 Watt DC power supply module for the Cisco ASR 9000 Series Aggregation Routers. It is specifically built for carrier-grade and service provider environments that use standard -48V DC power infrastructure.

Product Description

This module is a high-efficiency DC-DC converter that takes -48V DC input and converts it into the multiple regulated voltages required by the ASR 9000 chassis, route processors, and line cards. It supports hot-swapping and redundant configurations for maximum uptime. The A9K-750W-DC is widely deployed in telecom central offices and data centers where AC power is not preferred or available.

CISCO 47-5380-06 7200 SERIES VXR ROUTER

519320-001 HP D2700 Storage Array Controller SAS Enclosure