Dell 5H3XX Compellent 1.8TB 10K 12Gb/s 512e 2.5 SAS Hard Disk Drive

$130.05 (Ex. GST)

In stock: 5

The Dell 5H3XX (also known as 05H3XX) is an enterprise-class 1.8TB SAS hard disk drive (HDD) in 2.5-inch SFF (Small Form Factor) with a 12 Gbps SAS (SAS-3) interface and 10,000 RPM spindle speed.

This is a high-performance, tier-1 enterprise SAS HDD optimized for low-latency random I/O, high IOPS, and reliable 24×7 operation in demanding workloads such as databases, virtualization, VDI, OLTP, transactional systems, boot/OS volumes, and primary storage tiers.

It is a Dell Compellent-specific drive (rebranded HGST Ultrastar C10K1800, model HUC101818CS4204). Dell applies custom firmware and validation so it works seamlessly with Compellent SC-series storage arrays (SCv2020, SC4020, SC5020, SC7020, etc.) and their enclosures. It includes dual-port SAS for redundancy/multipathing, 128 MB cache, 512e sector format, and enhanced vibration tolerance for dense drive shelves.

Important Note: This is a Compellent-certified drive. It is not intended for use in standard Dell PowerEdge servers or non-Compellent systems. Using it outside Compellent arrays may result in detection issues, reduced performance, or lack of full support.

Dell Compellent Part Number: 5H3XX / 05H3XX

OEM Drive Model: HGST Ultrastar C10K1800 HUC101818CS4204

Drive Type: Enterprise performance SAS HDD (Compellent-certified)

Capacity: 1.8 TB (usable ≈1.64 TiB after formatting)

Interface: SAS 12 Gbps (SAS-3, dual-port)

Form Factor: 2.5-inch SFF (15mm z-height)

Spindle Speed: 10,000 RPM

Cache: 128 MB

Sector Format: 512e (Advanced Format)

Primary Use: Performance tier storage in Dell Compellent SC-series arrays and enclosures

Status (2025–2026): Legacy / End-of-Life – Compellent SC series is end-of-support; no new production

  • Capacity: 1.8 TB
  • Interface: SAS 12 Gbps (dual-port, backward compatible with 6 Gbps)
  • Spindle Speed: 10,000 RPM
  • Cache Buffer: 128 MB
  • Sector Format: 512e (Advanced Format)
  • Sustained Sequential Transfer Rate: Up to ~220–250 MB/s (outer to inner zones)
  • Average Seek Time: ≈3.8–4.2 ms (read) / ≈4.2–4.6 ms (write)
  • Rotational Latency: ≈3.0 ms
  • Average Latency: ≈6.8–7.2 ms
  • Random Read/Write IOPS (typical 4K QD32): ≈200–250 IOPS read / ≈180–220 IOPS write (HDD-limited)
  • MTBF: 2.0 million hours (enterprise rating)
  • Power Consumption: Idle ≈5–6 W / Active ≈8–10 W
  • Acoustics: ≈3.0–3.6 Bels (idle/seek)
  • Vibration Tolerance: Enhanced rotational vibration safeguards for dense enclosures
  • Operating Temperature: 5°C to 55°C
  • Form Factor: 2.5-inch SFF (15mm height) with Compellent-specific hot-swap carrier/tray
  • Carrier Type: Compellent SC-series 2.5" tray (black plastic/metal with latch)

Compatibility & System Use

Recently viewed products