Rate Product on Trust Pilot Logo

Dell QLogic 0Y3344 16gb fc dual port HBA

$237.30 (Ex. GST)

In stock: 1

The Dell 9F3GY (Dell internal part number 09F3GY, OEM Intel model SSDSC2BX800G4R) is an 800GB enterprise-grade SATA solid-state drive (SSD) from the Intel DC S3610 Series, fully rebranded, firmware-tuned, and rigorously validated by Dell for seamless integration into PowerEdge servers and compatible Dell/EMC storage platforms.
This drive belongs

The Dell 0Y3344 (also listed as Y3344 or cross-referenced with QLogic OEM part QLE2692) is a dual-port 16 Gigabit Fibre Channel Host Bus Adapter (HBA) — a high-performance storage networking card from the QLogic 2692 series, rebranded and fully certified by Dell for use in PowerEdge servers and Dell EMC storage environments.

Product Description

This is a PCIe-based 16Gb FC HBA that provides two independent 16 Gbps Fibre Channel ports (32 Gbps aggregate) for connecting servers to FC SAN fabrics, storage arrays (e.g., Dell EMC Unity, PowerStore, PowerMax, XtremIO, Compellent SC series), or tape libraries. It is backward compatible with 8 Gb/s and 4 Gb/s FC speeds, allowing seamless integration into existing SANs during transitions.

The card uses QLogic's 2692 ASIC (enhanced Gen5 technology), delivering:

  • High IOPS (up to ~650K–1.3M IOPS in some configurations)
  • Low CPU overhead via hardware offloads
  • Full support for NPIV (N_Port ID Virtualization), boot from SAN, error recovery, and end-to-end data integrity
  • Advanced features like FCoE readiness (firmware-dependent) and virtualization acceleration

It is a low-profile PCIe card (half-height bracket included; full-height optional) commonly used in Dell PowerEdge 13G–15G servers for SAN boot, high-throughput storage access, or multipathing (MPIO) setups. Dell validates it with custom firmware for seamless iDRAC/OpenManage monitoring, proper LED behavior, and compatibility with PERC controllers (when used in pass-through mode).

to Intel’s Data Center SSD family (DC S3610), a mixed-use (MU) / read-intensive optimized model built on Intel 3D MLC NAND (32-layer or later production runs), delivering exceptional performance, high endurance, and full power-loss protection (PLP) for mission-critical workloads in legacy server environments.
It is one of the most widely deployed SATA SSDs in Dell’s 11th–13th generation PowerEdge servers (and many 14G configs), particularly favored as a boot/OS drive, read caching layer, general-purpose performance tier, or VDI/web/analytics workload accelerator where cost-per-GB, reliability, and low power/heat are prioritized over maximum random write IOPS.

Ports: 2 × 16 Gbps Fibre Channel (independent ports)

Data Rate: 16 Gb/s per port (32 Gb/s aggregate)
Backward compatible: 8 Gb/s and 4 Gb/s FC (auto-negotiating)

Host Interface: PCIe 3.0 x8 (backward compatible with PCIe 2.0/1.1)

Form Factor: Low-profile PCIe card (half-height bracket included; full-height bracket optional)

Connector: 2 × SFP+ (LC) for multimode or single-mode fiber transceivers

Transceivers Supported:
16Gb short-wave (SW) 850nm multimode fiber (OM3/OM4)
16Gb long-wave (LW) 1310nm single-mode fiber

Dell Part Number | 0Y3344 (add-in PCIe version)
Controller Model | Dell QLogic 16Gb Dual Port FC HBA (QLE2692 equivalent)
Ports | 2 × 16 Gbps Fibre Channel (SFP+)
Host Interface | PCIe 3.0 x8
Form Factor | Low-profile PCIe card (half-height bracket)
Power Consumption | ~10–15 W
Supported Speeds | 16/8/4 Gbps FC (auto-negotiating)

0Y3344 Dell QLogic 16gb fc dual port HBA 2nd :: Alt () Other //

0Y3344 Dell QLogic 16gb fc dual port HBA 2nd :: Alt () Other //

$237.30 (Ex. GST)

$237.30 (Ex. GST)

Recently viewed products