All

Oracle 7341466 M.2 Form Factor Riser Assembly X7-2

IBM 46K4939 – POWER7 80mm Fan Assembly

The IBM 46K4939 is the 80mm fan assembly (also called fan FRU) for the IBM Power 780 (machine type 9179-MHB / 9179-MHC) and some configurations of the Power 770 (9117-MMB / 9117-MMC).

This is a hot-swappable, redundant cooling fan module that provides active airflow for the Central Electronics Complex (CEC) in these high-end POWER7 servers. It is a single 80mm high-speed fan housed in a plastic tray with a latch mechanism, designed to cool the processor books, memory DIMMs, and I/O components.

In the Power 780 (and multi-book Power 770), there are multiple fan assemblies (typically 6–8 depending on configuration) working together with N+1 redundancy. The system dynamically adjusts fan speed based on thermal sensors. If one fan fails, the remaining fans increase speed to compensate, and the system raises an alert via the HMC.

The Cisco 341-0502-01, manufactured by LiteOn, is a dual-output external AC/DC power adapter that provides 53.5V at 1.55A and 12V at 3.5A through a 4-pin connector. It is commonly used to power specific Cisco routers, wireless controllers, access points, and certain service modules that require this unique voltage combination.

This compact yet powerful brick-style adapter converts standard 100-240V AC input into two regulated DC outputs (53.5V for PoE or main power and 12V for auxiliary electronics). It is an official Cisco spare part, often referenced under the alternate part number 341-100399-01. The adapter is widely used with Cisco ISR series routers, Aironet wireless controllers, and some Catalyst or ASR components that do not use standard internal PSUs.

The IBM 00E6367 (also listed with CCIN 2BF8 and alternate part 00RR726) is a Processor Voltage Regulator Module (VRM) specifically designed as VRM-PROC2-CJ — a power regulation subassembly for the processor book (CPU complex) in high-end IBM Power Systems servers.

This is a DC-DC voltage regulator module that steps down bulk power from the server's main power supplies to precise, stable low-voltage rails required by POWER7 processors and associated memory/cache subsystems in the CEC (Central Electronics Complex). It is part of the PROC2 (Processor 2) voltage regulation group — one of several VRMs per processor book that work in parallel to deliver high current with redundancy and load sharing.

In high-end IBM Power Systems, each processor book (also called processor card or CPU book) contains multiple VRMs to support multi-core POWER7 SCMs (Single-Chip Modules) and large memory configurations. The 00E6367 / VRM-PROC2-CJ is a critical component in the power distribution chain — failure of this module can cause:

• Processor throttling or clock-down
• Voltage instability
• System crashes or boot failures
• Reduced performance under load
• Redundancy loss (N+1 or N+N configuration)

The module includes integrated protection (over-current, over-voltage, over-temperature), monitoring circuitry, and status LEDs. It is hot-swappable in redundant setups (when other VRMs can compensate) and is monitored via the Hardware Management Console (HMC) and ASMI (Advanced System Management Interface).

The Dell EMC 100-564-837 is a 1U sliding rack rail kit (commonly referred to as ReadyRails or universal sliding rails) designed for mounting 1U Dell EMC servers and certain 1U networking devices in standard 19-inch server racks.
This kit provides a smooth, full-extension sliding mechanism that allows the server to be pulled completely out of the rack for easy servicing, cabling, component replacement, or upgrades without needing to unmount or lift the entire unit. It is a tool-less or minimal-tool design for rapid installation in most rack types, making it one of the most commonly used rail solutions for Dell EMC 1U hardware in enterprise data centers, server rooms, and IT environments.

The 100-564-837 consists of a pair of adjustable, telescoping steel rails (left and right sides) with quick-release latches, snap-in mounting points, and included hardware for secure attachment. The rails extend fully, allowing complete server access while remaining safely supported in the rack.
It supports both 2-post (telco-style) and 4-post racks, with compatibility for:

Square-hole racks (tool-less snap-in installation)
Round-hole unthreaded racks (using cage nuts and screws)
Threaded racks (using provided screws)

The kit is adjustable to fit a wide range of rack depths (typically spanning ~631–868 mm or 24.8–34.2 inches), making it versatile for most standard 19-inch EIA-310 compliant racks from Dell and third-party manufacturers.
This rail kit is most frequently associated with Dell EMC PowerEdge 13th and 14th generation 1U servers (e.g., R630, R640, R430, R440, R330, R340), but it is backward compatible with many 13G models in square-hole or threaded racks. It is also used with some 1U Dell EMC networking switches (e.g., S4112 series).

IBM 74Y1749 9179 MHB Center Midplane

New HP 815983-001 (Alternative for 878643-001 815983-001 871264-001 750450-001 727260-001 727260-002) 96W Smart Storage Battery for flash back write cache (FBWC) Connects to the system I/O board 145mm (5.7-inch) long cable