All

ARISTA MOJO C-130 ACCESS POINT AP 802.11ac WAVE 2 4x4 MU-MIMO a/n/ac + b/g/n

Cisco C220-MS4_FCH2025V0CD Intel Xeon E5-2609v3 1.90Ghz, 64GB MEM, 2x 450GB 15K SAS Server

The Cisco C6800-16P10G (also known as C6800-16P10G V01) is a high-performance 40 Gigabit Ethernet line card for the Cisco Catalyst 6800 Series chassis-based switches (C6807-XL and C6816-XL Supervisor Engine 6T/2T).

This is a single-slot line card that provides:

• 16 × 10 Gigabit Ethernet SFP+ ports
• 4 × 40 Gigabit Ethernet QSFP+ ports

It is designed for high-density 10G/40G aggregation, data center access/aggregation, campus core/distribution, or service provider edge deployments where massive bandwidth and low latency are required.

The module is based on the CEF720 architecture with distributed forwarding (dCEF), delivering non-blocking, line-rate performance across all ports when used with a compatible Supervisor Engine (Sup6T or Sup2T). It supports full Layer 2/3/4 switching and routing, advanced QoS, security ACLs, Flexible NetFlow, MPLS, VRF-Lite, and large-scale multicast.

Key advantages:

• High port density in a single slot (16×10G + 4×40G)
• QSFP+ ports can be used as native 40G or broken out to 4×10G using QSFP-to-SFP+ breakout cables
• Excellent for 10G server aggregation with 40G uplinks to core
• Full hardware-based forwarding with large forwarding tables

This line card was a popular upgrade for Catalyst 6800 chassis that needed to scale beyond the older 10G line cards (e.g., WS-X6716-10G) while maintaining investment in the 6800 platform.

CISCO C819GW-LTE-GA-EK9 819H ethernet x 4, ethernet x 2, serial x 1

C9130AXI-Z Cisco 802.11ac 9130AX Wireless Access Point 802.11. Cannot be added to a new Cisco smartnet agreement.

Cisco Catalyst C9400-LC-48U 9400 48-Port UPOE 10/100/1000 (RJ-45) Switch

DELL CG2YM H330 SAS 12GB PCIE

The Cisco CISCO2921/K9 is a 3-port Gigabit Integrated Services Router from the Cisco 2900 Series (launched 2010–2011) — a 1RU rack-mountable, modular branch-office router designed for medium-sized businesses, branch offices, and distributed enterprise sites requiring advanced routing, security, voice, wireless LAN controller functionality, and WAN optimization in a compact form factor.

Product Description

The Cisco 2921 is a high-performance, modular ISR (Integrated Services Router) that combines routing, security, voice, and application services into a single platform. It features:

• 3 onboard Gigabit Ethernet RJ-45 ports (GigabitEthernet0/0, 0/1, 0/2) — configurable as LAN or WAN interfaces
• 3 Enhanced High-Speed WAN Interface Card (EHWIC) slots for expansion (e.g., T1/E1, serial, ISDN, LTE, additional Ethernet, voice modules)
• 1 double-wide EHWIC slot (can be used for larger modules like SM-1T3/E3)
• 1 Internal Service Module (ISM) slot for optional security/acceleration cards (e.g., IPSec VPN, WAAS)
• 1 Packet Voice Data Module (PVDM3) slot for voice DSPs (supports up to 100 voice channels with PVDM3-100)
• Dual redundant power supply bays (default single PSU; optional second for redundancy)
• Redundant hot-swap fans (front-to-back airflow)

It runs Cisco IOS (or IOS-XE in later images) with full modular software licensing:

• IP Base (default) — basic routing, security, QoS
• Upgradable to Security, UC (Unified Communications), AppX (Application Experience), or full UC license bundles

Common deployment scenarios:

• Branch-office WAN router with MPLS/Internet breakout
• DMVPN hub/spoke or GETVPN
• Voice gateway (SRST, CME, CUBE)
• SD-WAN edge (with Viptela/IWAN)
• Small wireless LAN controller (up to 50 APs with UC license)

The Cisco 3745-IO-2FE (also referenced as Cisco Catalyst 3745 2-Port Fast Ethernet IO Controller) is an internal daughtercard / I/O controller that was factory-installed or field-replaceable on the Cisco 3745 Modular Access Router (part of the Cisco 3700 Series routers, launched early 2000s).

Product Description

This small card mounts directly onto the motherboard of the Cisco 3745 router and adds two additional Fast Ethernet (10/100 Mbps) RJ-45 ports (typically labeled FastEthernet0/2 and FastEthernet0/3 in IOS) beyond the two built-in Fast Ethernet ports on the base chassis (FastEthernet0/0 and FastEthernet0/1).

Key points:

• It is not a modular network module (NM), WAN interface card (WIC), or external card — it is an integrated I/O controller soldered or plugged internally.
• Adds basic Layer 2 Ethernet connectivity (10/100 Mbps, full/half-duplex, autosensing) for LAN segments, DMZ, separate VLANs, or connecting to downstream switches/routers.
• Fully integrated with the router's main forwarding engine — supports all standard Cisco IOS Layer 2/3 features on these ports (VLANs, QoS, ACLs, static routing, etc.).
• Commonly seen in Cisco 3745 configurations that needed more than two Fast Ethernet ports without consuming external WIC/NM slots.

CR1225 3V Lithium Button Battery

Nimble Storage CS400 San Controller w/Super X8DTS-F Xeon E5645 2.40GHz 24GB RAM

Dell PowerEdge R420 Server, Intel Xeon E5-2403 0, 8GB Ram

Dell PowerEdge R720 16x SFF disk bays Rackmount Server SN 9SNFD25 inc. 1x E5-2640 cpu, 64GB Ram

The Dell PowerEdge R720 (service tag/serial number 35K1621) with 16 × 2.5-inch SFF disk bays, 1 × Intel Xeon E5-2665 CPU, and 80 GB RAM is a 2U rack-mount enterprise server from Dell's 12th-generation PowerEdge family (launched 2012). This is a very common, highly configurable platform that was widely deployed for virtualization, databases, file serving, web/application hosting, backup targets, and general-purpose workloads throughout the 2010s and early 2020s.

The PowerEdge R720 is a dual-socket 2U rack server based on the Intel Xeon E5-2600 v1 (Sandy Bridge-EP) architecture. Your configuration includes:

• Chassis: 16 × 2.5-inch SFF (Small Form Factor) hot-swap drive bays (supports SAS/SATA HDDs/SSDs; optional 8 × 3.5" LFF config available but this unit is SFF)
• Processors: 1 × Intel Xeon E5-2665 (8 cores / 16 threads, 2.4 GHz base clock, 3.1 GHz turbo, 20 MB L3 cache, 115W TDP) → Single-CPU config (second CPU slot empty — can be upgraded to dual E5-2600 v1/v2 series)
• Memory: 80 GB DDR3 ECC Registered RDIMM (likely 10 × 8 GB or 5 × 16 GB DDR3-1333/1600 modules; maximum supported 768 GB with 24 DIMM slots)

This server offers excellent balance of compute, memory, storage, and I/O for its generation. The 16 SFF bays provide flexible storage options (e.g., high-IOPS SSDs for boot/OS/performance tier + high-capacity SAS/SATA for bulk data). The embedded PERC RAID controller (typically PERC H710 or H710P in this era) supports RAID 0/1/5/6/10/50/60 with optional battery-backed cache.

Networking and expansion are strong:

• 4 × 1 GbE embedded NICs (Broadcom or Intel-based)
• Up to 7 × PCIe 3.0 slots (depending on riser configuration)
• iDRAC7 (Integrated Dell Remote Access Controller 7) with dedicated management port for full out-of-band remote management (KVM, virtual media, power control, monitoring)

The R720 runs VMware ESXi, Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux, Ubuntu, Oracle Linux, or older OSes — with full Dell validation for virtualization hypervisors and enterprise applications.

The Hitachi DF850-CBSLR (also referred to as DF850-CBSLR or part of the Hitachi Unified Storage 110 (HUS110) family) is a dual-controller LFF (Large Form Factor) storage enclosure — a 12-bay 3.5-inch disk array unit from Hitachi Data Systems (HDS, now Hitachi Vantara) Unified Storage platform, launched in the early 2010s.

The DF850-CBSLR is a controller-equipped base enclosure (Controller Box with Single-Controller or Dual-Controller LFF Rear configuration) that serves as the primary storage building block for Hitachi Unified Storage (HUS) 110 systems. It integrates dual RAID controllers (for high availability and failover), a 12 × 3.5-inch LFF SAS/SATA drive bay backplane, and all necessary I/O modules, power supplies, fans, and midplane for direct-attached or SAN-connected storage.

Key characteristics:

• Dual active/active controllers — each with embedded cache, SAS ports, and FC/iSCSI host interfaces (depending on configuration)
• 12 × 3.5-inch LFF hot-swap drive bays — supports SAS HDDs (7.2K/10K/15K) and SATA HDDs for capacity-optimized storage
• SAS-2 (6 Gbps) back-end connectivity (via internal SAS expanders)
• Modular expansion — can connect to additional DF850-DBS/DBL drive boxes (expansion shelves) for scaling capacity up to dozens of drives
• RAID support — RAID 0/1/5/6/10/50/60 via Hitachi Storage Navigator Modular 2 (SNM2) management software
• Host interfaces — typically 8/16 Gb Fibre Channel, 1/10 Gb iSCSI, or FCoE (via optional I/O modules)
• Redundant hot-swap components — dual PSUs, dual controllers, redundant fans/cooling
• Front-to-back airflow — standard for data center racks

This enclosure was commonly used in:

• Midrange SAN/NAS storage for block/file workloads
• Backup targets, archival, secondary storage, or VTL (Virtual Tape Library)
• Small-to-medium enterprise environments before migration to newer Hitachi VSP or HPE/Nimble/NetApp platforms

Acer Veriton M4640G M6640G HDD Hard Disk Drive Bracket DP.13411.06J

NAJ-1001 NetApp DS2246 24-Drive Storage Array 2x IOM6 Controllers 2x Power Supply No HD